MM2008 – Legionella Thermometer w/ Integral 1 & 2 Minute Timers

We recommend you take your thermometer in both hands with your thumbs at the top of either side of the face opening of the boot. Push your thumbs upwards, so that you are peeling the boot over the top of the thermometer.

Installing and or Replacing the battery is very easy. Simply remove the rubber boot, open the battery compartment in the back of the thermometer, remove the battery and replace with a new one.

Your thermometer needs to be slid bottom first in to the base of the boot. Then I would recommend that you insert your index finger through the rear window of the boot and push the front lip of the boot upwards in multiple places along the lip. Once you have manipulated the boot a litle bit you should be able to push the thermometer down until it slips in.

Yes it does. Each thermometer is calibrated and a unique serial number is assigned and registered on our database. Your unique serial number sticker can be found in the battery compartment.

To the right of the product photographs there is a section where you can add a four temperature point certificate to your order. Simply click on 'Add UKAS Traceable Calibration' and tick one of the three choices. This will reveal the area for selecting your four points.

In the battery compartment you will see that in the area where the battery is inserted there is a black and white sticker. The information contained on that sticker includes your thermometers unique serial number, the month and year that your thermometer was calibrated and the same a year hence when your thermometer would require recalibration.

TME thermometers can be wiped over with a damp cloth or cleaning wipes. If your TME thermometer has a rubber boot, this can be removed and washed in warm soapy water or cleaned in a dishwasher.

Yes, the thermometer will operate normally without starting the timer.

Simply press the Timer 1 button to start the one minute timer or Timer 2 button to start the two minute timer.